Aircraft Catering Trucks range of lifting mechanisms
Forklift type lifting mechanism, forklift and chute are made of BS960EQ high-strength steel, which are bent, welded and calibrated by special molds.
One-time boring is adopted after welding to ensure the coaxiality of the fork carrier, which results in higher lifting synchronization precision and greater safety coefficient.
The weight of the lifting device is greatly reduced while the strength of the fork frame and the chute is strengthened.
Forklift beam adopts wider design, wider than the chassis beam of automobile, which can fully guarantee the stability of pure electric aviation food truck in the lifting and lowering process.
Each part of the axle pin has bushings, oil injection holes, and the roller shaft is a through shaft.
Aircraft Catering Trucks Series Lifting Cylinder
●The lifting cylinder adopts double cylinders in parallel, one-stage plunger type, the starting angle of the cylinder is ≥33°, the initial lifting force of the cylinder is large, which effectively reduces the pressure of the system and the wear and tear of the seals.
Wider design of forklift guide rail, reaching 1210mm, wider than the car beam (850mm wide), greatly improving the stability of the food truck lifting compartments.
The rotating speed of the motor for lifting and lowering the carriages and supporting feet is automatically increased, and the flow rate of the system is automatically increased, which makes the lifting and lowering of the carriages more stable.
