Aircraft Potable water service trucks Jiangling National V manual transmission Type II chassis, partial modification. The rear end of the main beam is welded with a working platform frame. The left side of the platform frame is a staircase, which is used for staff to enter the box for maintenance and cleaning. The right side of the platform frame is a clean water pipe conveying device. On the right side of the main beam, there are a water pump, an inlet pipe, a hydraulic pump and hydraulic accessories. On the left side of the main beam, a diesel tank and a hydraulic oil tank are placed.
The outer shell of the clear water tank is made of high-quality stainless steel plates with a thickness of 3mm and welded by argon arc welding. The inner welding of the tank is smooth and free of burrs. The bottom surface of the tank is made into an arc shape. The water tank is installed with a certain inclination to facilitate drainage. A filter screen is installed at the water outlet inside the clear water tank, which can well protect the water pump. A water filling port is installed at the upper end of the clear water tank. In cold regions, the water tank adopts an insulated water tank. The insulated water tank is based on the normal-temperature water tank, with a 2.5mm thick cold-rolled steel plate wrapped around it and a 30mm thick foamed material filled in the middle. The Aircraft Potable water service trucks clear water pipe is composed of stainless steel pipes and hoses
Aircraft Potable water service trucks
Overall dimensions of the vehicle (length × width × height) :6530×1900×2150
The external dimensions of the box (length × width × height) :3200×1900×760
The capacity of the clean water tank is 4000L
Front overhang :1070
Rear overhang :2370
Wheelbase :3360
Chassis model :JX1061TG25
Engine model :JX493ZLQ5
The curb weight of the entire vehicle: 2,950 kg
Front axle load (no-load/full-load) :1040kg / 1140kg
Rear axle load (no-load/full-load) :1910kg /3910kg
The maximum total mass of the clean water tank when fully loaded is 6,950 kg
Fuel consumption per 100 kilometers :≤12 liters
The outer diameter of the channel circle: 14,000 mm
Minimum ground clearance :205mm
Pump: Material: Stainless steel corrosion-resistant centrifugal pump, rotational speed :1500r/min, flow rate :>130L/min
Clear water supply pressure :0.345MPa
Working pressure of the hydraulic system :10MPa
The capacity of the hydraulic oil tank is 78L
Hydraulic oil model :32# Aviation Ground hydraulic oil
Diesel tank capacity :100L
Tire specification :7.00R16
Voltage :12V (two batteries in series)
