Bulk cargo loader (electric) conveyor belt frame on both sides of the C-structure, made of hot-rolled steel plate bent. The middle is welded into a whole through a rectangular tube, the front roller and the back roller are installed in the front and rear of the frame by bolts, the supporting roller is installed in the chip groove inside the girder, the front and rear of the frame are equipped with an anti-deviation device, and the upper and lower position of the rear roller can be adjusted through a screw. The oil motor is installed in the inner side of the longitudinal beam on the right side of the transmission frame, and drives the front drum through the chain sprocket and makes the transmission belt rotate. The support at the lower back of the frame longitudinal beam is connected with the rear lifting frame, and the front end of the frame is mounted on the roller of the front lifting frame. If the front and rear lifting cylinders are telescopic, the transmission frame longitudinal beam is lifted up and down with the lifting frame.
The chassis body is welded from special high-strength steel. Chassis covered, removable. The chassis is fitted with four hydraulic legs and four spring plates. The chassis consists of transmission, steering, braking and cab. The drive system uses the motor controller to control the variable frequency speed regulation drive motor as the primary power, and transmits the power through the main deceleration drive axle, rim and tire. Drive motor controller and drive motor using famous company products; Suspension with longitudinal leaf springs. The steering system is controlled by the electric hydraulic pump driving the steering hydraulic cylinder through the full hydraulic steering device. The braking system is an electric vacuum pump to provide vacuum assisted braking, front disc and back drum type, dual pipeline hydraulic braking system.
JSTY5040JCSE bulk cargo loader (electric type), mainly by electric drive chassis, chassis frame, cab, lightweight design, transfer frame device, hydraulic system, electrical system and front and rear axle and other parts.
