Catering Highloaders Safety rules and recommendations
Safety is an important factor that can affect the life of a machine. Remember: Driving safely protects yourself and those who work around you, while also avoiding the danger of damaging your vehicle.
① Only authorized personnel may drive the vehicle.
② Pay attention to the bearing limit.
Drive at an appropriate speed, avoid driving on slack or uneven roads, and slow down before turning.
④ Pay attention to pedestrians and do not get too close to the vehicle in front.
Do not stop in front of the fire hydrant to avoid delay in use.
If the operator finds any mechanical, electrical, hydraulic abnormalities, it must contact the personnel responsible for mechanical maintenance.
⑦ Daily maintenance as required.
The maximum speed of the vehicle is 80km/h, which is not the usual driving speed. The maximum speed in the airport is less than 35km/h, it is recommended to drive slowly when approaching or leaving the aircraft, and choose the driving speed according to the environmental conditions.
⑨ Do not use this device to transport passengers.
Before use, the operator must ensure that all control, driving and emergency equipment are in working conditions.
He must ensure that all parts are not damaged, loose or under obvious danger.
Do not operate any joysticks or pedals that may injure people during the movement of the machine.
Make sure there are no people or objects in front of you before you start the vehicle.
We should be extra careful when working in a narrow and crowded place.
⑮ Comply with all safety requirements at all times in any location.
⑯ Persons must be pulled by a speed appropriate for load and road conditions.
⑰ Do not follow the vehicle in front too closely.
18) Do not brake sharply, the vehicle can only hang in neutral after stopping.
⑲ Turning is paying attention to the path of the trailer (aircraft).
⑳ Do not pass at intersections, forks or obstructed vision.
⑳ Don't brake violently.
Drive carefully at appropriate speed, paying attention to pedestrians, other vehicles and the height of the passage.
23 Slow down on slippery or abnormal roads and turns.
24 When passing junctions, passages, corridors, slow down and honk to keep driving on the correct side of the road.
Catering Highloaders main technical parameters
Platform working height (mm) : 2600 ~ 6200
Body load rating (kg) : 6200
Front platform load rating (kg) : 2500
Front platform moving part load rating (kg) : 700
Adjustment range of the left and right parts of the front platform (mm) : 0~700
The expansion adjustment range of the moving part of the front platform (mm) : 0~600
Dimension of fixed part of front platform (L × W) (mm) : [(1900×2265) (L/W)]/[(1400×2400) (D/W)]
Dimension of the moving part of the front platform (length × width) (mm) : 950×1200 950×1200
Maintenance weight (kg) : 13280
Overall dimensions (L × W × H) (mm) : [10400 (L/W) /10320 (D/W)]×2500×[3700 (without awning) /3800 (with awning)] -
Chassis :QL5190TZZAEQHY
External dimensions (length × width × height) (mm) :7500/7200×2500×2400
Engine emission: The emission meets the requirements of stage 6b in the sixth stage of GB 17691-2018 China, and the exhaust smoke meets the requirements of GB 3847-2018
Front platform fixed part load rating (kg) :1800
