CN
Home » News » Industry News » Fire and Rescue Brigade

Fire and Rescue Brigade

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Fire and Rescue Brigade docking procedures

1.1 Open the operating box, turn the "key switch" clockwise, push the "ladder body lift" button, and make the ladder body rise slowly.

Until the front support wheel is completely off the ground:

1.2 Control the remote control, drive the vehicle (two people cooperate, try to use manual steering), the front end of the ladder body

Adjust to about 5 meters from the ship's side and park the vehicle perpendicular to the ship's deck:

1.3 Push the "ladder Lift" button to adjust the front end of the ladder body to the required height:

1.4 The remote control vehicle slowly approaches the side of the ship at a low speed, and at the same time, push the "ladder lift" and "ladder drop" switches to cooperate

Remote control handle operation, so that the front end of the ladder body hook groove, accurately lapping on the side of the ship deck edge, put down the arc lapping plate, and the iron chain and the ship's side reliably fixed (this iron chain is only used for fixing the ladder body and the ship's side, can not bear the weight of the ladder body);

1.5 Turn the "brake release" button clockwise (at this time, the "brake release alarm" light will be lit), so that the chassis brake is in

Release status:

1.6 Flip the "ladder descent" switch, slowly fold the hydraulic leg, so that the support frame tire off the ground, off the ground height

When the hull swings, the tire does not touch the ground;

1.7 Turn on the lighting facilities according to the weather conditions and close the operation box before boarding and disembarking passengers.


Fire and Rescue Brigade set up advanced electrical and hydraulic control system, the product is beautiful in appearance, easy to operate, safe and reliable use. The ground height of the product connecting platform is set at 1500mm-6000mm.


Fire and Rescue Brigade main technical performance parameters

Maximum passenger capacity (persons):15

Movable ladder :30 steps

Step size: Pedal width (mm):800

Pedal depth (mm):300

Inside width of ladder body (mm):816mm

Ladder body outside width (mm):1000mm

Minimum ground height (mm):1100

Maximum ground height (mm):6000

Hydraulic system pressure (Mpa):10

Hydraulic tank volume (L):25

Voltage (V):72

Maximum travel speed (km/h):7


Fire and Rescue Brigade docking procedures


Relation

Navigation

Contact Us

Jiangsu Tianyi Aviation Industry Co., Ltd.
 
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
 
Shanghai Office: Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
 
Tel: +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86-137 6133 5725 (As WeChat)
             +86-195 1652 8308
             +86-189 6407 9542
E-mail: joinsun@jstianyi.com.cn
             airport.gse@jstianyi.com.cn
Copyright © Jiangsu Tianyi Aviation Industry Co., Ltd. All Rights Reserved. Sitemap