The water tank in the cold area uses the incubator water tank. The insulation water tank is based on the normal temperature water tank with a layer of 2.5mm thick cold-rolled steel plate, and the foam material is filled with 30mm thick in the middle to keep the water tank warm and prevent freezing in winter.
Pure electric aircraft water truck The upper end of the cleaning tank is provided with a water inlet, which is provided with a tight sealing cap. There is a clear and intuitive water level gauge in the water inlet position of the water tank, which can clearly and correctly reflect the liquid level height in the box.
Pure electric aircraft water truck clean water box shell is made of high quality 1Cr18Ni9Ti/4 stainless steel plate with a thickness of 4mm and a capacity of 5000L. The material is food grade stainless steel and argon arc welding is adopted. The internal welding of the box is smooth and burr free. The bottom surface of the box is made of circular arc, and the water tank is installed with a certain inclination for easy drainage. The water outlet inside the water tank is equipped with a filter screen, which can protect the pump well. The inside of the water tank is equipped with a stainless steel anti-swing plate with a thickness of 3mm, which can avoid the shaking phenomenon when the vehicle is running after the water tank is added, and the welding is firm, the layout is reasonable, and the cleaning is easy. The top of the water tank is equipped with an air valve, the water tank and the car girder are fixed in the form of rubber cushion connection, which reduces the vibration of the box when the car is driving.