CN
Home » News » Industry News » toilet unloading vehicle water tank adopts 0Cr18Ni9Ti/4 stainless steel plate

toilet unloading vehicle water tank adopts 0Cr18Ni9Ti/4 stainless steel plate

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

The toilet unloading vehicle water tank is made of 0Cr18Ni9Ti/4 stainless steel plate, and the tank consists of three completely isolated compartments: 240L circulating water compartment, which provides circulating water for the vacuum pump; 1000L fresh water compartment, which provides fresh water for the airplane, and is equipped with a circular manhole cover on the top of the compartment; and 2000L sewage compartment, which stores sewage discharged from the sewage compartment of the airplane, and is divided into two identical compartments by a baffle plate. The sewage compartment 2000L is divided into two identical compartments by the baffle plate, the top of the compartment is equipped with two round manhole covers, two breathing valves, when the vacuum level reaches the rated vacuum pressure of the box, the breathing valves begin to suction from the outside of the box to the inside of the box, so as to ensure the safety of the box, the bottom of the box is equipped with a sewage outlet, sewage box tail end surface is equipped with a sewage observation window, which allows you to observe the sewage level of the water in the compartment. The box is connected to the chassis through 6 rubber shock absorbers, which can well buffer the vibration of the water tank during the movement of the car. The upper surface of the water tank has imported anti-slip stickers, which can prevent the operator from slipping when working on the water tank and overhauling. Clear, sewage water tank is equipped with "well" shaped waterproof plate, to prevent the impact of the water flow and churning of the vehicle in traveling.

The water tank is equipped with a thickness of 4mm molded stainless steel anti-swing plate, to avoid the water tank after adding water to the vehicle driving shaking phenomenon, and welded firmly, reasonably arranged, easy to clean; in the top of the water tank were equipped with ventilation valves. Two water tanks and car beams are fixed using rubber cushion coupling form, reducing the vibration of the box body due to the car in motion.


Technical parameters of toilet unloading vehicle

Total length mm: 6550

Overall width mm: 1900

Overall height mm: 2150

Wheelbase mm: 3360

Wheelbase (front/rear) mm: 1385/1425

Front overhang mm: 1090

Rear overhang mm: 2100

Approach angle (°): 20

Departure angle (°): 6

Longitudinal passing angle (°): 14

Minimum ground clearance mm : 200

Passage circle mm: 15500

Total mass kg: 3600

Water supply flow rate L/min: ≥150

Fresh water tank volume L: 1000

Water supply pressure Mpa: 0.345

Sewage tank volume (with/without vacuum pump) mm : 2000/2200

Platform lifting range mm: 400~2800

Vacuum tank volume (with/without vacuum pump) mm : 200/0

Maximum speed km/h: 80

Chassis model: JX1061TG25

Tank material/thickness mm :0Cr18Ni9Ti/4.0


toilet unloading vehicle water tank adopts 0Cr18Ni9Ti/4 stainless steel plate


Relation

Navigation

Contact Us

Jiangsu Tianyi Aviation Industry Co., Ltd.
 
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
 
Shanghai Office: Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
 
Tel: +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86-137 6133 5725 (As WeChat)
             +86-195 1652 8308
             +86-189 6407 9542
E-mail: joinsun@jstianyi.com.cn
             airport.gse@jstianyi.com.cn
Copyright © Jiangsu Tianyi Aviation Industry Co., Ltd. All Rights Reserved. Sitemap