Hand-pushed Passenger Boarding Car

WTJ3600TKT passenger boarding car is composed of door moving assembly, guard plate assembly, ladder body assembly, lifting mechanism, bottom frame assembly, platform assembly, tail ladder assembly, etc. The ladder structure is vertical plate type. When the boarding ladder goes up and down, the upper and lower stairs move in parallel four sides, and the height of the platform varies from 2640 to 3600mm.

Availability:



Inquire

Product Description

Model：hand-pushed-Passenger boarding car

Main technical parameters

Serial	Parameter name		parameter
1	The carrying capacity of the whole ladder		33 people
2	Maximum tilt Angle of ladder body		39°
3	Safety factor of ladder against wind tipping during operation		0.73
4	Safety factor of the whole ladder against wind tipping when parked		0.9
5	Maximum tilt Angle of ladder body		39°
5	Overall dimensions of the vehicle (length × width × height)		6500×2230×3650
6	Platform size		2000×1400
7	wheelbase		4030
8	Wheel pitch	Front wheel pitch	900
		Rear wheel pitch	1550
9	Total vehicle quality		1780kg
10	Ladder series		18
11	allow speed	Maximum towing speed	20km/h
		Maximum operating speed	3km/h
12	Pedal height		140-200
13	Channel circle outer circle diameter		14000mm
14	Departure Angle		5°
15	Angle of approach		33°
16	Maximum tilt Angle		39°
17	Height adjustment mode		Step parallelogram displacement formula
18	Walking mode		Push or pull by hand
19	Working height of passenger elevator car		2640~3600
20	Tyre specification		4.00-8/5.00-8
21	Minimum ground clearance		160mm