 |
Model：Baggage Conveyor Belt Loader
Product standard
Reference material for IATA AHM 905 Station support equipment for civil aircraft
IATA AHM 910 Airport ground support equipment Basic requirements
IATA AHM 913 Airport ground support equipment Basic safety requirements
Technical specification for IATA AHM-925 Self Drive Conveyor Loader
MH/T 6030-2014 Bulk Cargo Loader
AC-137-CA-2015-17 Specification for testing bulk cargo loaders
GB/T 18488-2006 Motor for electric vehicles and its controller
GB/T 24347-2009 DC/DC Converter for electric vehicles
GB/T 18384-2001 Safety requirements for electric vehicles
GB/T 18487-2001 Conduction charging system for electric vehicles
GB/T 20234-2015 Connecting devices for conductive charging of electric vehicles
Communication protocol between non-on-board conductive chargers and battery management systems for electric vehicles
DB11/Z993-2013 Technical Specification for Electric Vehicle Remote Service and Management System
Main performance indicators:
| Serial | name | parameter |
| 1 | Vehicle length × width × height (mm) | 8200×2150×1990 |
| 2 | Wheelbase (mm) | 2900 |
| 3 | Wheel base front/rear (mm) | 1730/1680 |
| 4 | Approach Angle (°) | 10.5 |
| 5 | Channel circle outer circle diameter (mm) | 16200 |
| 6 | Departure Angle (°) | 31 |
| 7 | Longitudinal passage Angle (°) | 20 |
| 8 | Total vehicle mass (kg) | 3240 |
| 9 | Maximum speed (km/h) | 25 |
| 10 | Minimum stable speed (km/h) | 0.5 |
| 11 | Driving range (km) | 255 |
| 12 | Endurance (large airport) (km+t) | 203+300 |
| 13 | Endurance (medium airport) (km+t) | 199+297 |
| 14 | Endurance (small airport) (km+t) | 197+297 |
| 15 | Driving motor power (kw) | 30 |
| 16 | Energy storage device assembly Ningde era (kwh) | 60.16 |
| 17 | Discharge energy density | PED=157.18WH/KG |
| 18 | Conveyor belt frame length (mm) | 8200 |
| 19 | Conveyor belt width | 700 |
| 20 | Top end | 4300 |
| 21 | Front end minimum | 1100 |
| 22 | Highest back end | 1530 |
| 23 | Lowest back end | 480 |
| 24 | Total weight of conveyor belt for flat transmission (kg) | 1080 |
| 25 | Angle maximum gross weight per piece (kg) | 400 |
| 26 | Transfer speed (m-s) | 0.16-0.5 |
| 27 | Applicable temperature condition | -35-65 |
| 28 | Minimum stable speed | 0.5 |
