Electric Air Catering Truck(Upgrade)

JSTY5180JSPE Electric air catering truck (patent No. : 201921164876.4). Under the premise of optimization of structural performance and function by lightweight design, using new material (high strength steel BS960E Q) advanced technology, Qingling QL1180BVEELQHY (chassis approved total mass 18 tons, overload will cause serious damage to the vehicle, Qingling company maintenance damage caused by overload will not claim), Tianyi Stock has produced 13,790 tons of national tested vehicle reconditioning mass, 6 tons of car body rated load, and 19.99 tons of total vehicle mass. It is the only product in the industry whose total chassis mass is not overweight and equipped with safety matching system. At present, the product is the lightest total weight, the largest bearing capacity, the best steering and braking performance, the lowest maintenance and operation cost, the highest safety and reliability of pure electric aviation food truck. The tires are 295/60R22.5 18PR.

Availability:



Inquire

Product Description

Model：JSTY5180JSPE Electric air catering truck

Product standard

MH/T 6016-2017 "Airline Food Truck"
AC-137-CA-2019-04 "Aviation Food Truck Test Specification"
AC-137-CA-2015-20R1 General Technical Requirements for Ground Service Equipment for Electric Aircraft
JG 5099-1988 Safety Regulations for Working Machinery at Altitude
GB 7258-2004 "Motor Vehicle operation safety Technical Conditions"
AHM910 Basic Requirements for Aeronautical Ground Equipment
AHM913 Basic Safety Requirements for Aviation Ground Equipment
AHM915 Standard Control
AHM910 "Basic Requirements for Station Support Equipment for Civil Aircraft"

Main assembly structure and main technical parameters

	Type	Permanent magnet synchronous motor		species	Lithium iron phosphate
Drive motor	Rated power/speed kw/r/min	100/1200	Energy storage device	type	Energy type
	Rated current A	180		Assembly system	2 and 192 strings
	Insulation class	H
	Protection class	IP67
	Rated voltage VAC	380		Assembly voltage V	618.24
drive	Input voltage VDC	400~750		Total energy stored kWh	281.92
electric	Rated output voltage VAC	380		Unit nominal voltage V	3.22
Machine control device	Control mode	Torque control		Unit rated capacity Ah	228
Cab type		Flat head	Number of passengers		3
Total length mm		10620	Total width mm		2500
Total height mm		3780	wheelbase mm		5550
Wheel base (front/rear) mm		1970/ 1840	Maximum speed km/h		59.5
Quality of maintenance kg		14350	Total mass kg		19550
Minimum ground clearancemm		160	Channel circle outer circle diameter mm		20800
Working height of platform mm		2550～ 6100	Rated carriage load kg		5000
Front platform rated bearing capacity kg		2000	Forward platform moving part rated bearing capacity kg		600
Rated bearing capacity of fixed part of front platform kg		1400	Left and right adjustment range of front platform moving part mm		0～700
Dimension of fixed part of front platform (length × width) mm		1900× 2265	Moving part of front platform (telescopic adjustment range) mm		0～600
Dimension of moving part of front platform (length × width) mm		830×1200	Internal dimensions of car body (length × width × height) mm		6750×2360×2200
External dimensions of car body (length × width × height) mm		7500×25 00×24 00	Driving range km		435
Temperature range ℃		-35～60	——		——

List of main assembly of sample car

Serial	name	Type number
1	chassis	JSTY5180JSPE-0100000
2	Vehicle controller	HCDN67VCU-41B
3	Five in one integrated controller	HC60LTPIC -F12BG
4	Driving motor	TZ380XSM12
5	Oil pump motor	HCDM030HP2
6	Oil pump motor controller	HCDMC055VT7
7	Energy storage assembly	228Ah618.24V1P192SH
8	Energy storage unit	CB230
9	Steering shaft	F063
10	Drive shaft	R130
11	Front/rear tires	10R22.516PR
12	Hydraulic pump	CBHZ-F25-ALФL
13	Lift cylinder	D160/145-1070
14	Front/rear leg cylinder	D90/63-290
15	Moving platform cylinder	D40/30-700
16	Telescopic platform cylinder	D40/30-600
17	Electric emergency pump	800601632
18	Hand pump	PMO 50-s